Last Update: "2008/06/08 20:41:45 makoto"
serial console
- inside of 9-KE
(カモン社 9-KE分解記)
-
http://www.kannet.ne.jp/tomaru/kenkyuushithu/technic/9-ke/9-ke.htm
We have two color types of leads if you get 9-KE cable.
9-KE (の線の色) には二つの種類がある。
赤黄黒緑 と
橙黒赤茶 である。
type1 type2
DSUB <- 1 TXD Red Orange from KUROBOX/PRO (output)
DSUB -> 2 RXD Yellow Black to KUROBOX/PRO (input)
3 VCC Black Red (No connection)
4 GND Green Brown GND
- データ転送ケーブル
-
http://www.yamasita.jp/tools/9-ke.html
- Larwe.comm Kuro_serial
-
http://www.larwe.com/technical/kuro_serial.html
- Serila Console for LS-GL and Kurobox/PRO (by Kawauchi San)
-
http://www5.atwiki.jp/kuro-bsd/pages/212.html
9-KE connection
DSUB <- 1 TxD (Red)
DSUB -> 2 RxD (Yellow)
3 3.3V output from the box
4 GND (Green)
Getting 9-KE at Sengoku-Tsusho (千石通商),
This cable is designed to connect Computer directly,
behaving as an Modem. That means DCE (Data Circuit End).
The speed to communicate is 57600 bps. With blank IDE disk connected,
and the first time boot messages are:
dmesg in EM mode
(KURO-BOX/HG).
- manual setup of kuro-box
-
http://www.kurobox.com/forums/viewtopic.php?t=21
clock speed
The real clock of serial line is not even numbers:
http://www.genbako.com/bootloader/kuro-hg/
bootcode-serial-clock.txt
... 32,768,000 / 570 = 57488 ( 570 = 2 x 3 x 5 x 19 )
|